Cameron/pico-examples
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Updates along with SDK1.3.0 release (#181)

Browse Source 
Bug fixes and new examples

Co-authored-by: Paulo Marques <pm@quant-insight.com>
Co-authored-by: martin <admin@crossleys.biz>
Co-authored-by: matiasilva <matias.silva@raspberrypi.com>
Co-authored-by: Uri Shaked <uri@urishaked.com>
Co-authored-by: Diego Solano <diegosolano@gmail.com>
Co-authored-by: Andrew Scheller <andrew.scheller@raspberrypi.com>
Co-authored-by: Adrian Hesketh <a-h@users.noreply.github.com>
Co-authored-by: Emircan Gündoğdu <58917386+emircangun@users.noreply.github.com>
Co-authored-by: Josef Wegner <80200012+josefwegner@users.noreply.github.com>
Co-authored-by: pmarques-dev <72901351+pmarques-dev@users.noreply.github.com>
Co-authored-by: Paulo Marques <pm@quant-insight.com>
Co-authored-by: mjcross <mjcross@users.noreply.github.com>
Co-authored-by: martin <admin@crossleys.biz>
This commit is contained in:
Graham Sanderson
2021-11-01 14:41:54 -05:00
committed by GitHub
parent 146680d625
commit f800a7e303
150 changed files with 4832 additions and 98 deletions
Download Patch File Download Diff File Expand all files Collapse all files

42
i2c/pa1010d_i2c/README.adoc Normal file
View File

@@ -0,0 +1,42 @@
= Attaching a PA1010D Mini GPS module via I2C
This example code shows how to interface the Raspberry Pi Pico to the PA1010D Mini GPS module
======
This allows you read basic location and time data from the Recommended Minimum Specific GNSS Sentence (GNRMC protocol) and displays it in a user-friendly format. The datasheet for the module can be found on https://cdn-learn.adafruit.com/assets/assets/000/084/295/original/CD_PA1010D_Datasheet_v.03.pdf?1573833002. The output sentence is read and parsed to split the data fields into a 2D character array, which are then individually printed out. The commands to use different protocols and change settings are found on https://www.sparkfun.com/datasheets/GPS/Modules/PMTK_Protocol.pdf. Additional protocols can be used by editing the init_command array.
======
[NOTE]
======
Each command requires a checksum after the asterisk. The checksum can be calculated for your command using the following website: https://nmeachecksum.eqth.net/.
The GPS needs to be used outdoors in open skies and requires about 15 seconds to acquire a satellite signal in order to display valid data. When the signal is detected, the device will blink a green LED at 1 Hz.
======
== Wiring information
Wiring up the device requires 4 jumpers, to connect VDD, GND, SDA and SCL. The example here uses I2C port 0, which is assigned to GPIO 4 (SDA) and 5 (SCL) in software. Power is supplied from the 3V pin.
[[pa1010d_i2c_wiring]]
[pdfwidth=75%]
.Wiring Diagram for PA1010D.
image::pa1010d_i2c.png[]
== List of Files
CMakeLists.txt:: CMake file to incorporate the example in to the examples build tree.
pa1010d_i2c.c:: The example code.
== Bill of Materials
.A list of materials required for the example
[[pa1010d-bom-table]]
[cols=3]
|===
| *Item* | *Quantity* | Details
| Breadboard | 1 | generic part
| Raspberry Pi Pico | 1 | https://www.raspberrypi.com/products/raspberry-pi-pico/
| PA1010D board| 1 | https://shop.pimoroni.com/products/pa1010d-gps-breakout
| M/M Jumper wires | 4 | generic part
|===